High Speed Woven Corrugated Belt

Woven high speed corrugator belt was developed to transfer board and the rapid drying of the board. The structure and the quality fabric of the belt facilitates steam evaporation from the board. The belt is 3-layer belt. The structure of two surface layers are not the same as the middle layer. This structure is developed to produce flat boards on high-speed corrugating machines. The surface of the belt is twill, this reduces the noise while the belt runing on the machines. The material of the two surface layer are not the same as the middle, this can increase the friction coefficient.

Product Features:
1. Straight cut edge and long service life.
2. Level surface, clean mark.
3. Hot-press and flocking joint.
4. High moisture absorption and release; Low noise and high speed of operation.