Sludge Dewatering Filter Press Belts

Sludge dewatering filter press belt

As the mesh belt is herringbone design, sludge and mesh belt stripping fast, easy to mud, a lot of mud, easy to clean, quick and easy connection

POLYESTER SLURRY DEWATERING FABRICS BELT WITH STEEL-CLIP JOINT

POLYESTER SLURRY DEWATERING MESH BELT

POLYESTER SLUDGE DEWATERING FABRICS/MESH BELT

1. Brief Introduction:

usage: is mainly used for sludge dehydration in sewage treatment factoris

characteristics: As the mesh belt is herringbone design,good water permeability and non-revealed sludge, acid resisting, alkali-resisting, heat resistance(180 degree), can be easily cleaned and have a long working time.

FAQ

1.Q:Howtoconfirmthetype?

A:Therearemanymethodsforustoconfirmthetype:

1).tellusthespecificationsdata.

2).tellusyourrequirementsasmoreaspossible,

andourengineerswillgiveyouthebestsuggestionanddesignthemostsuitablemesh/wire/fabrics/screen/belt.

3).sendusthephotoswithsize

4).sendusasmallpiecesample.

2.Q:Wahtisthepaymentterms?

A:WepreferT/T,butforsomecountries,wewillalsoacceptL/C.

Soplsfeelfreeaboutthepayment.

3.Q:Whenwilldeliverythegoods?

A:Usally,wewilldeliverthegoodswithin15workingdays.Andifthequantityisbig,itwilltakeabout20-30workingdays.

4.Q:Howlongwillthefabirc/wire/screen/belt/meshbeused?

A:Thetimeisdifferentdiffertheusageandfactory.

ButwecanconfirmandmakesurethatourproductcanbeusedlongerthananyotheroneinChina.

5.Q:Isthepackagestrongenoughforthelongtransportation?

A:Ofcourseitis.

Bysea,wewillpackeverypieceintowooden/polywoodbox.

Byair,wewillpackitbystrongwater-proofbag.

type 16903:

warp diameter: 0.70mm, warp density: 17thread/cm

weft diameter: 0.90mm, weft density: 4.5thread/cm

surface indensity: 2200N/cm, joint indensity: 900N/cm

water permeability: 38.6S/5L, air permeability: 7920m³/m²h
 

weight: 1.7kg/m²

thickness: 2.0mm

Hot Tags: Sludge Dewatering Filter Press Belts, China, factory, manufacturer, suppliers, wholesale, buy, seamless fabrics for dewatering, belt filter press, spiral press belt, spiral belt for pulp press, press belt, filter belt